Accidentally damaging a stone tile can be frustrating to say the least, especially if it interferes with the natural stone tiling effect you’ve worked so hard to achieve. A lot of the time, we ignore damaged tiles and accept the fact that there’s little you can do to repair them. Well in fact, there is something you can do. Here’s how to replace a damaged tile…
– Loosen the grout around the edges of the damaged tile using a grout remover. Once you’ve done this you can start to rake out the rest of the grout.
– Drilling holes into the central areas of the tile helps to weaken the surface, so use a small ceramic drill bit and drill four holes in a square shape into the tile. You can increase the size of the ceramic drill bit if necessary.
– Equip yourself with a hammer and chisel and gradually chip away at the central space between the holes you’ve made. This gets rid of the central part of the tile, although you should be careful not to scratch the wall beneath it.
– From here, use the chisel to get underneath the rest of the tile, moving towards the edges until you’ve removed it entirely. This is where you need to be careful not to damage the surrounding tiles. Try and get rid of much of the adhesive as possible as well.
– Check that your replacement tile fits neatly into the new gap and that the adhesive isn’t pushing the tile further out in comparison to the others. Put new adhesive on the replacement tile and position it in the space.
– Use a flat piece of wood with that is larger in length to the tile to push it into place. Fit new tiles spaces so you can fill in the edges with grout. It’s important to wait for the adhesive to dry before doing this.
